A family roofing company serving Bumpus Mills and the rest of Tennessee through our network of local crews. Tin roofs, repairs and replacements done right.
Pick a service to see how we handle it and what the job usually looks like on a Bumpus Mills roof.
New skylights set into metal or shingle roofs, with the flashing kit the roof actually calls for rather than a tube of sealant.
From a few tabs to a whole slope, we fix shingle roofs without pushing you toward a replacement you are not ready for.
Coatings for low slope and older metal roofs that are still sound but weathered. Washed down, refastened, primed at the rust, then coated.
Churches, shops, barns and small commercial buildings. We have roofed everything from a wood shed to a steeple.
If two other people have caulked it and it still leaks, call us. Most stubborn leaks turn out to be flashing, a valley, or a fastener nobody thought to check.
Squirrels, wasps and water all treat a soft soffit as a front door. We close it up properly instead of patching over it.
Hard wind lifts shingles and works panel fasteners loose along the edges, which is exactly where the next storm gets underneath. We refasten, replace and reseal.
Wind and debris damage is not always obvious from the ground. We check the edges, the ridge, the valleys and the fasteners before telling you anything is fine.
Repair or replace, we handle both, and we work from what the roof actually needs rather than from what an adjuster might approve.
We repair standing seam, exposed fastener panels and metal shingles, and we match the color as closely as the paint system will allow.
Where it makes sense we set low slope metal over a problem section so it finally drains instead of ponding after every rain.
Guards and screens so you are not up a ladder every fall digging pine needles out of the gutter by hand.
A replacement is a big spend and it should feel orderly. We schedule around dry weather, work in the right order, and never leave a house open overnight.
Temporary cover goes on fast, then we come back and make the permanent repair once we can see properly what we are working with.
This is the work our name is attached to. Two decades of tin roofs on houses, churches, barns and additions, installed by crews who cut the trim on site instead of forcing something that almost fits.
Ice backs up at a cold eave and pushes water sideways under the roof. We clear it without gouging the panels or the shingles.
Lifted panels, missing shingles, flashing that has given up where the chimney comes through. We find what is actually wrong, fix that, and leave the rest of your roof alone.
Careful footwork, matched materials, and flashing done the way it was done when the roof went on.
The layer you never see is what keeps water out on the ugly days. We do not thin it out to save a few dollars on a bid.
Inspections come free with an estimate. We would rather find the small problem this spring than replace a ceiling for you next winter.
Roofing Brothers began in 2002 as a family roofing company in Morganton, North Carolina, and it is still run the way it started. Homeowners in Bumpus Mills reach that same outfit — the one that has been setting metal panels and laying shingles for over twenty years — through our network of local crews.
In a city the size of Bumpus Mills, word travels fast about who does good work and who does not. That suits us fine. We would rather put one roof on right and have the neighbors ask about it than chase volume all over Tennessee.
Nothing fancy — free estimates, honest answers, and roofs that go on straight.
The same family started this company putting metal roofs on neighbors houses in 2002. It has never been sold, franchised or handed off to a call center.
You get a start date and we hold to it. If weather moves your job we call you, rather than leaving you watching the driveway.
Around twenty standard metal colors, and the chart comes out with the estimate so you can hold it up against your siding and shutters before you commit.
If your roof needs a repair and not a replacement, we say so. Plenty of our best customers are people we talked out of a job they did not need yet.
Standing seam and metal panel roofs are the work we are known for. Color, trim, fastening pattern — we have done hundreds and we will walk you through all of it.
Common questions from Bumpus Mills, TN homeowners about metal roofs, repairs and what a roof costs.
No. Estimates are always free in Bumpus Mills. We come out, measure, look in the attic if we can get to it, and leave you a written price. Nobody will push you to sign anything that day, and the number does not expire in an hour.
A metal roof installed properly on a Bumpus Mills home should give you 40 to 60 years, and standing seam often goes longer because there are no exposed fasteners. Screws and sealants on a panel roof want attention around year 20, which is a small job next to a re-roof.
Sometimes. If the decking is sound and there is only one layer of shingles, a Bumpus Mills metal roof can go over the top on purlins. If there is rot underneath or two layers already on, we tear off first — and we will tell you that before you sign, not halfway through.
Any dry stretch works. We roof in Bumpus Mills year round, though we schedule shingle work for when it is warm enough for the strips to seal properly, and we watch the forecast so your house is never left open overnight.
A typical Bumpus Mills shingle roof runs roughly $8,000 to $18,000 in 2026 for an average single family home, and more if the deck has rot or the roof is steep and cut up with dormers. We do not price off a satellite photo — somebody comes out and measures.
Most Bumpus Mills houses are a two to four day job. A straightforward shingle roof can be done in a day or two. A cut up metal roof takes longer because every panel, valley and trim piece is measured and fit on site rather than pulled out of a box.
We would rather let the work, and the people who paid for it, do the talking.
"Good crew and a good roof. It took about a week longer than planned because of rain, but they called every single time the schedule moved, which I appreciated."
"Thank you so much to the entire crew at Roofing Brothers for our amazing new tin roof! You were amazing to work with and I couldn't recommend you to others enough! Great communication, pricing, color options, efficiency, and HONESTY! If anyone needs a new roof, I highly recommend this crew! Phenomenal job."
"Called them about one leak and they found two more just getting started. Fixed all three and still charged less than I had budgeted for."
Looking for a roofer just outside Bumpus Mills? These areas are covered too.